Description
NF-611 HDMI Cable Tester
Features:
1. Fast and accurate verification with type A – A, A – C and C – C connectors.
2. Check miswires, short, open and cross status of HDMI cables.
3. Mapping continuity and proper configuration.
4. Displays 19 pin-to-pin and shield connection status on both main and remote unit.
5. Adjustable test modes:Fast/slow scan/manual test for step by step.
6. Design with loopback function.
Attention:
1.Don’t connected high voltage lines to avoid buring out the machine.
2.Put into the right place to avoid hurting others,because of the sharp part.
3.Connected the cable to the right port.
4.Read the user manual before use it.
| Cables versions support | HDMI cables with type A & C connectors conforming to 1.0,1.1,1.2,1..2a, 1.3,1.3a,1.3b,1.4,1.4a,Category 1 and category 2 HDMI cables |
| Support test | 19 pin to pin wiremap and shielding detection |
| Test interface of master unit | HDMI ( type A) x1, Mini HDMI (type A ) x1 |
| Test mode | Fast / slow scan / step by step |
| Test distance | Under 50 meters |
| Status Display | 19 leds and shield led on both master and remote unit |
| Beeper indication | Yes |
| Low battery indication | 6.0V |
| Power source | DC 9V (NEAD 1604/ 6F22) x1 (not included) |
| Environment | Operating:0 to 40 < 80% RH Storage:-10 to 50 <70%RH |
| Dimensions | Master unit:103x66x27mm Remote unit:103x35x27mm |
| Name | HDMI cable tester |
| Model | NF-611 |
| Wire map | 19 pin+Shield |
| Cable type | A-A, A-C, C-A |
| Test type | Master+Remote |
| Status display | No |
| Test distance | ＜ 50 meters |
| Low battery indication | Yes |
| Test mode | Fast/slow/step by step |
| Battery | 9 V |
Be the first to review “NF-611 HDMI Cable Tester”
Reviews
There are no reviews yet.