PS-100 Panel Mount TDS Controller

Install the Panel Mount Controller to constantly monitor TDS levels of water produced by a high-output system.

•Monitors and controls TDS levels for high output commercial systems. 

•Large, bright L.E.D. display. 

•An alarm will sound if the TDS level rises above the user-set level. 

•Installs easily in minutes. 

•Includes one sensor probe (at no extra cost).

•Protective cover also available (sold separately)

Range: 0 – 999ppm 

Accuracy: ±2% 

Conversion Factor: NaCl (avg. 0.5)

Resolution: 1 PPM 

ATC: Yes (1 – 65 degrees Celsius) 

Calibration: Adjustable (manual)

Setting: Controlled by on-screen up/down buttons 

Relay Control: The unit will open or close a circuit via dry contacts when the ppm level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. 

Relay Voltage: 5V 

Alarm: Optional steady beep (set by user) 

Display: Bright 5/8″ L.E.D. display 

Probe: 1/2″ bushing, 3 meter (9.8 ft) shielded cable 

Power supply: AC 110V / AC 220V 

Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.) 

Monitor Weight: 476 g (1 lb .8 oz) 

Total Weight: 680.4 g (1 lb 8 oz)