PSC-150 Conductivity/TDS Controller

 

Monitors and controls TDS levels for high output commercial systems.

Large, bright LED display.

An alarm will sound if the TDS level rises above the user-set level.

On-screen temperature display (C/F).

Installs easily in minutes.

Includes one sensor probe (at no extra cost).

Protective cover also available (sold separately)

 

EC Range: 0-9999 µS; TDS Range: 0 – 5000ppm 

Temperature Range: 1-75°C; 33-167 °F 

Accuracy: ±2% 

Conversion Factor: NaCl (avg. 0.5)

Resolution: 0.1µS/ppm (0-999); 1µS/ppm (1000-9999)

ATC: Yes (1 – 65°C) 

Calibration: Adjustable (manual)

Setting: Controlled by on-screen up/down buttons 

Relay Control: The unit will open or close a circuit via dry contacts when the ppm/µS level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. 

Relay Voltage: 5V 

Alarm: Optional steady beep (set by user) 

Display: Bright 5/8″ L.E.D. display 

Probe: 1/2″ bushing, 3 meter (9.8 ft) shielded cable 

Power supply: AC 110V / AC 220V 

Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.) 

Monitor Weight: 476 g (1 lb .8 oz) 

Total Weight: 680.4 g (1 lb 8 oz)